Blisterverpakkingsmachines voor kleinschalige productie

Choosing blister packaging machines for small-scale production starts with batch frequency, operator work, and pack requirements. Your tablet or capsule format matters as much as speed. This guide compares six models. We supply the LDPP-140H and DPP-90R discussed below.

What Does Small-Scale Production Require?

A small batch can be an occasional packaging experiment or an order that returns every week. Although both involve limited quantities, they create different demands on the person operating the machine.

For development work, you may need to prepare a format, examine the pack, and adjust the next run. For recurring orders, you also need to know how the complete batch fits into the available production time.

Write down the quantity required per run and how often the format will change. Then identify the employee who will operate the equipment and the time that person can spend loading products or replenishing materials.

These operating requirements need a physical pack specification alongside them. Record the tablet or capsule dimensions, quantity per pack, intended cavity layout, and packaging materials. They establish the format that the machine must actually produce.

For drug products subject to US CGMP, 21 CFR 211.94 requires containers and closures to protect the product without adversely altering its quality. [1] Define your product’s protection needs before selecting the packaging materials.

These requirements concern the drug’s packaging system. Your machine specification must then address how the chosen materials will be formed, gevuld, en verzegeld.

With that information, you can make the first useful choice: a workflow with separate manual stages, or an automatic sequence supported by an operator. The LDPP-140H and DPP-90R show how those two approaches work in practice.

Manual Or Automatic Blister Packaging Machines?

LDPP-140H For Hands-On Development

The LDPP-140H is our tabletop laboratorium blisterverpakkingsmachine. Its documentation lists Alu-Plastic and Alu-Alu packaging for tablets and capsules, with a maximum forming area of 110 × 120 mm.

Its documented dimensions are 640 × 580 × 700 mm, and it weighs 118 kg. Those figures give you a starting point for planning the supporting work surface, with additional room needed for materials and handling.

For a PVC and aluminum-foil pack, you manually pull one end of the PVC into the forming position. Once the pockets are formed, you place the tablets or capsules into them by hand.

You then replace the forming mold with the heat-sealing mold. Place the loaded PVC blister in the sealing position, add the aluminum foil, and press the heat-sealing button. Na verzegeling, you manually switch to the cutting station.

Watch the LDPP-140H demonstration to follow the operating sequence.

This gives you a tabletop workflow for preparing and examining development packs. For a deeper discussion of experiments and laboratory work, see our laboratory blister packaging guide.

The manual stages also show where the operator spends time during each run. As orders become more frequent, it is useful to examine how an automatic sequence changes those tasks.

DPP-90R For Recurring Production

DPP-90R brings automatic forming, product loading, afdichting, and cutting into one sequence. One employee can operate it during normal production, replenishing the product feeder when it runs empty.

Product loading therefore becomes part of the machine sequence, while the employee handles replenishment. When the PVC or aluminum foil runs out, the machine gives an alarm and the operator replaces the exhausted material.

Include these replenishment tasks when setting the production schedule and deciding how much of the employee’s time is needed for the batch.

Watch the DPP-90R demonstration to see the equipment in operation.

Our documentation lists a nominal capacity of 2,300 blister plates per hour, with output dependent on the material and application. The standard forming-area specification is 80 × 110 mm with a 15 mm depth; greater depth is a customization.

DPP-90R can also be configured for Alu-Alu packaging, which requires changing the complete tooling and feeding set. The full set belongs in the quotation so that the material choice is reflected in the equipment supplied.

Whichever workflow fits your schedule, it still needs tooling that accommodates the planned pack. That is where the published format specifications become relevant.

How Do Small Blister Machine Specifications Compare?

Start that check with the forming or format area, while keeping the supplier’s terminology intact. A maximum forming area and a usable forming area are different specification labels; neither should automatically be treated as the dimensions of your finished pack.

The table shows the published workflows and area figures for six models. Keep the labels attached to the numbers when you review your proposed format.

The four external entries reproduce manufacturer descriptions and dimensions, without a performance ranking. Sources [6]-[9] were checked on 9 November 2026. Our entries combine company specifications with confirmed operating details.

Use your intended layout to ask how the pockets, sealing area, and cutting arrangement fit within the proposed tooling. This turns a published area figure into a review of the pack you need.

Once the format has been established, the remaining capacity question is how long that configuration takes to deliver a complete batch.

How Much Output Can You Expect Per Batch?

Compare Finished Packs Over The Same Period

Published speed figures count different events. DPP-90R’s nominal figure refers to blister plates per hour. ACG publishes forming cycles per minute, while Sepha’s approximately 200 cycles per hour applies to any single operation.

Those units cannot establish a finished-pack ranking by themselves. Your pocket layout and cutting arrangement determine how a cycle relates to the packs you collect, and separate operations still need to be completed.

Request the number of acceptable finished packs produced during a defined trial period. Record the product, materiaal, layout, and machine configuration with the result, together with stops and rejected packs.

You can then relate the demonstrated result to your required quantity. Keep an observed result separate from a target proposed for another product or setup.

Include Preparation And Replenishment

The trial also needs to show the work surrounding production. Include preparation, warm-up, operating checks, goedkeuring, and cleaning when deciding whether a batch fits your schedule.

WHO’s pharmaceutical GMP guidance calls for documented line clearance before packaging, with the area and equipment free of items left from previous work. [4] Account for that task when scheduling a pharmaceutical batch, particularly when you change products or printed materials.

For LDPP-140H, account for the manual stages already described. For DPP-90R, include feeder replenishment and PVC or foil replacement. Record active operator time separately from periods when the machine is processing.

This distinction matters if the same employee has other duties. Observe which tasks can overlap and which need to finish before the next operation starts, rather than assigning additional work from the nominal machine speed alone.

The measured batch time and operator work also affect purchasing cost. Use them alongside the required pack format when defining the equipment and options in your quotation.

What Affects Blister Packaging Machine Cost?

Materials And Tooling

Use the intended pack drawing and material combination to specify the tooling. A PVC and aluminum-foil pack and a cold-formed aluminum-based pack require their respective forming arrangements.

FDA’s 1999 container-closure guidance discusses packaging protection, verenigbaarheid, veiligheid, en prestaties. [2] Use those considerations to define the pack with your quality team; a machine’s ability to form a material does not establish its suitability for your drug.

For new-drug stability programmes within ICH Q1A(R2)’s scope, section 2.2.4 recommends testing the dosage form in the container-closure system proposed for marketing. [3] Plan the trial materials around that intended pack and the evidence your quality team needs.

For DPP-90R Alu-Alu packaging, the complete replacement set includes the forming mold, voeder, geleiderails, heat-sealing mold, and cutting mold. All five items belong in the requested configuration.

Identify the formats required at the start and those you may need later. Ask for the selected materials, voeder, gereedschap, and requested options to be recorded together so that the quoted scope matches your packaging plans.

Working Space And Safe Access

That configuration also has to fit the working area. Review an installation drawing showing space for product loading, material replacement, tooling access, en schoonmaken, including any supporting equipment.

For LDPP-140H, use the documented dimensions to begin planning the work surface. Add room for the materials and manual actions around it. For the proposed DPP-90R configuration, check the corresponding installation layout.

Our practical selection priorities are safe operation, a compact working area, en gebruiksgemak. During a demonstration, follow the normal operating sequence and ask how you safely approach hot surfaces, replenishment, and tooling changes.

Confirm the electrical supply, gecomprimeerde lucht, cooling requirements, and other services for the quoted configuration. Record what you need to prepare before delivery alongside the layout and operating instructions.

Equipment Scope And Operating Cost

With the tooling and installation requirements defined, request the base machine, product feeder, format parts, and options as an itemized scope. Include supporting equipment where it forms part of the proposal.

Then use your batch observations to assess recurring costs, including packaging materials, startup rejects, operator work, and the tasks between formats. Apply the same assumptions when reviewing quotations for the same packaging requirement.

A complete proposal should connect the price to the work and configuration you have discussed. The final step is to demonstrate that proposed arrangement with the product and pack it is intended to run.

How Do You Test The Machine Before Buying?

Arrange the trial around your tablet or capsule dimensions, quantity per pack, materialen, and intended layout. Ask what products and packaging materials you need to provide, and agree the required quantities in advance.

Before the run, define the checks your quality team will use for product position, cavity condition, pack dimensions, en afdichting. This gives the demonstration an agreed purpose beyond showing that the machine moves.

For projects governed by EU GMP, Bijlage 15, sections 7.1-7.2 address packaging-equipment qualification and operating ranges for critical parameters, including temperature, machinesnelheid, and sealing pressure. [5]

Use that framework to agree the relevant settings and acceptance checks for your packaging process. A supplier demonstration provides evidence for equipment selection; your site’s qualification and validation work remains a separate responsibility.

Follow the batch from setup to the collection of accepted packs. Record the actual configuration, bedrijfsomstandigheden, uitgang, and employee tasks. Where a result depends on a particular material or layout, retain that condition with the record.

Review the result against the batch schedule you established at the beginning. For development work, confirm that the manual sequence suits the task. For recurring production, confirm the demonstrated output and the replenishment work the employee needs to perform.

You can then finalize a configuration around evidence from your intended packaging task. With the technical choice established, the remaining purchase questions concern documentation and support; the following answers explain those arrangements.

Veelgestelde vragen (FAQ)

The following answers describe Ruida Packing’s equipment documentation and service policies.

Which Qualification And Acceptance Documents Can We Provide?

We can provide technical documents for FAT/SAT and DQ, IQ, OK, en PQ. Agree the document scope and any execution services for your proposed machine and project before ordering.

What Does Our One-Year Warranty Cover?

Our warranty starts when you receive the equipment and lasts one year. Free parts during that period are limited to the applicable wear-parts list, and the buyer pays the freight for replacement parts.

Confirm the list and applicable conditions for your proposed machine before ordering. Keep those terms with your equipment documentation so that the scope is clear when you request support.

Is Remote Installation And Training Support Included?

We provide free remote installation, inbedrijfstelling, and training support. After purchase, lifetime technical consultation and remote video advice are also available.

Agree the communication method and the work to be covered for your project. This gives your team a defined route for installation questions, operating guidance, and technical consultation as you use the equipment.

How Is Overseas On-Site Service Charged?

Overseas on-site service can include installation, inbedrijfstelling, opleiding, and trial production. The engineer fee is US$200 per working day, starting when the engineer begins work at your factory.

The customer also covers airfare, accommodation, and meals. There is no minimum number of service days under the confirmed policy. Agree the visit arrangements and project scope when reviewing your equipment proposal.

Can We Supply Manuals In Your Preferred Language?

We provide a complete English operating manual, and the language can be customized to your requirements. Discuss the requested language and document scope before ordering so that they are recorded for your project.

Installatie, inbedrijfstelling, and after-sales videos are also available. Confirm which materials you need for the staff who will operate and maintain the machine.

Final Thoughts

Choose LDPP-140H when its hands-on workflow fits your development batches, or DPP-90R for an automatic sequence with normal single-employee operation. Share your product, indeling van de verpakking, and batch schedule to discuss the DPP-90R blister packaging machine configuratie.

Referenties

1. Amerikaanse FDA / eCFR. 21 CFR 211.94 – Drug Product Containers And Closures. Current text, Titel 21 displayed as updated 5 November 2026. United States; paragraphs (A)-(D).

2. Amerikaanse FDA, CDER/CBER. Container Closure Systems For Packaging Human Drugs And Biologics. Kunnen 1999, final guidance. Sections III.B.1 and III.G.

3. I / Amerikaanse FDA. Q1A(R2) Stability Testing Of New Drug Substances And Products. FDA final guidance, November 2003. Sectie 2.2.4.

4. Wereldgezondheidsorganisatie. WHO Good Manufacturing Practices For Pharmaceutical Products Main Principles. WHO Technical Report Series 986, Bijlage 2, 2014. Sections 16.25-16.27.

5. Europese Commissie. EudraLex-volume 4 Bijlage 15 Qualification And Validation. Revision dated 30 Maart 2015, operationeel 1 oktober 2015. Europese Unie; sections 7.1-7.2.

6. ACG. MINIBLIS PLUS Official Product Specifications. Undated product page, accessed 9 November 2026.

7. Mactec. MT100 Small Blister Pack Machine. Undated product page, accessed 9 November 2026.

8. Pharmaworks. BlisterMate Semi-Automatic Blister Machine. Undated product page, accessed 9 November 2026.

9. Sepha. EZ Blister Official Product Specifications. Undated product page, accessed 9 November 2026.