پرش به محتوا 
گوانگژو, چین | ژوئن 15, 2026 - اخیرا, Ruida Packing welcomed a client delegation from Ghana for an on-site visit and technical discussion. The visit was hosted by Sales Executive Emmy, who guided the clients through the showroom and introduced the دستگاه پرکن کپسول اتوماتیک NJP-3800D according to their production needs.
Emmy introduced the capsule filling machine to clients
The Ghanaian client is a pharmaceutical and nutraceutical manufacturer mainly producing herbal powder capsules and vitamin capsules. As their market demand continues to grow, the client plans to upgrade to a higher-capacity automatic capsule filling solution. Before making a decision, they wanted to better understand three key issues: how the capsule filler improves filling stability, how the encapsulation machine handles powders with different flowability, and how it reduces powder waste during continuous production.
Clients asked questions about the machine’s stability and accuracy
بر اساس این نگرانی ها, Emmy introduced the NJP-3800D capsule filling machine as the main focus of the visit. This model is designed for high-output capsule production and can fill hollow capsules from size 000# به 5# with powders, گرانول, pellets and tablets. During the explanation, Emmy emphasized that a high-speed capsule filler is not only about output. For pharmaceutical and nutraceutical manufacturers, دوز پایدار, smooth powder flow, easy cleaning and powder waste control are equally important.
One of the first points that attracted the client’s attention was the modular design of the filling station. Emmy explained that the NJP-3800D adopts a structured and modular design, making the machine easier to inspect, clean and maintain. The filling rod holder is designed with a pull-out slot, allowing operators to replace filling rods more conveniently when changing capsule sizes or production requirements. For manufacturers producing multiple capsule products, this structure helps shorten changeover time and reduce operation difficulty.
Modular design of machine’s filling station
The team then explained the importance of the machine’s seamless electronic polishing process. The filling rods, upper and lower mold holes, and measuring plates all undergo seamless electronic polishing. This treatment improves material flow between workstations and helps reduce common powder problems such as sticking, clogging and moisture absorption. For herbal powder capsules, where the material may have uneven particle size or relatively poor flowability, this detail is especially important for maintaining stable filling during long production runs.
Another key feature discussed during the visit was the three-dimensional adjustment filling mechanism. Emmy explained that when the client needs to fill different capsule products or clean the measuring plate, the three-dimensional adjustment structure allows engineers to keep the measuring plate level. This helps ensure filling accuracy and long-term stability. For a high-speed encapsulation machine, keeping the measuring plate in a stable and level position is directly related to dosing precision and finished capsule quality.
Three-dimensional adjustment
The client also showed strong interest in the powder recovery device. During capsule filling, unused powder and powder from rejected capsules can easily become a cost concern, especially when the raw material is herbal extract or high-value supplement powder. Emmy explained that the NJP-3800D is equipped with a powder recovery device, which helps recover powder and reduce material waste. This design improves raw material utilization and supports more economical capsule production.
Powder recovery device
علاوه بر این, the team introduced the machine’s patented turntable design with positive pressure blowing and its double-seal configuration. The patented turntable uses imported silicone sealing rings to help prevent powder from entering the internal structure, while the positive pressure blowing design further helps keep dust away from key operating areas during high-speed capsule filling. در عین حال, the capsule suction, بیرون ریختن, rejection and locking axes adopt a double-seal configuration: one seal helps prevent lubricant loss, and the other blocks powder from entering the bearings. These details help reduce powder accumulation, avoid powder-related machine jams, and support stable long-term operation.
Patented turntable with positive pressure blowing
در طول بازدید, the client asked detailed questions about capsule size changeover, powder cleaning, دقت پر کردن, mold maintenance and continuous operation. Emmy answered the questions by connecting each machine structure with the client’s real production concerns. به عنوان مثال, the modular filling station helps with easier changeover, the polished filling parts help improve powder flow, the three-dimensional adjustment supports more stable dosing, and the powder recovery device helps reduce waste.
Emmy answered clients’ questions
از طریق این بازدید در محل, the Ghanaian client gained a clearer understanding of how the NJP-3800D supports high-speed capsule filling for pharmaceutical and nutraceutical production. The visit was not only a machine demonstration, but also a technical discussion around powder handling, dosing stability, waste reduction and long-term production efficiency.
Engineer explained the machine’s workflow
Ruida Packing will continue to provide practical and reliable capsule filling solutions for global customers. By understanding each client’s product characteristics and production goals, Ruida Packing aims to help manufacturers improve automation, reduce waste and build more stable capsule production lines.
