Ayrıca çok istasyonlu tablet pres olarak da adlandırılır, Toz ve granülleri farklı çaplara ve kalınlıklara sahip tabletlere verimli bir şekilde basabilir. Ve özelleştirilmiş kalıplarla, Malzemeler, ihtiyaçlarınız için farklı şekillere bile basılabilir, yuvarlak gibi, üçgen, çekirdek çubuk, ve özel şekilli tabletler.
Saatte 37.800 adete kadar
Maksimum. ki. of tablet 20mm
Maksimum basınç 100kn
15 Gün Hızlı Teslimat
| Örnek | ZP-11D | ZP-15D | ZP-7D | ZP-19D | ZP-21D |
| Maksimum Basınç | 100kn | 80 kn | 60kn | ||
| Tabletin Maksimum Çapı | 40mm | 25 mm | 20 mm | 13 mm | 12 mm |
| Maksimum Üretim Kapasitesi | 13200 pc/h | 27000 pc/h | 30600 pc/h | 34200 pc/h | 37800 pc/h |
| Güç | 3.0KW | ||||
| Gerilim | 380/220V 50Hz (özelleştirilebilir) | ||||
| Ağırlık | 1000kilogram | ||||
| Boyut | 890*650*1680mm | ||||
1. This machine has high pressure and large tableting range, and can compress tablets of various shapes, such as ordinary, irregular and circular shapes.
2. ZP-17D series tablet press is equipped with pressure overload protection device, once overloaded, it will automatically stop to avoid equipment damage.
3. This tablet press is equipped with a turntable double suction, with six suction ports up and down, with good powder removal effect and a clean surface of the turntable.
4. The turntable is made of nodular cast iron QT500, pressed by solid bar material, with strong hardness, heat resistance, wear resistance and good system stability.
5. The power part is sealed and placed at the bottom to prevent contact with materials and reduce secondary pollution.
6. Low noise. The upper and lower rails are made of cast steel. The running arc and angular position of the rails are designed scientifically. The large-angle linear structure makes the mold run smoothly and has low noise.
7. The mold is made of GCR15 material, which has strong hardness and good corrosion resistance.
*Gizliliğinize saygı duyuyoruz ve tüm bilgileriniz korunmaktadır.
